|
We
rebuild most original Antique
ELECTRIC Oven or Broiler Elements
Before a technician does any troubleshooting or removes parts, to avoid
personal injury or even death: First they would disconnect your
stove from its power source - unplug it, break the connection at the circuit breaker or fuse box. Note: be
careful of sharp edges on parts. Label wiring for
reinstallation. A technician reinstalling should be careful the part
does not 'fry' due to faulty installation.
Large Ovens and Pizza Oven
Elements:
Each loop may have different voltage and watts
After an element is taken out
clean each loop to read different voltages and watts stamped on each.
Also
email info on the Block and Tag.
See # 2.
and 3. below...
Domestic Oven / Broiler
ELEMENTS
After an element is taken out Email:
1. Information stamped on the element block, plug and frame -
Voltage, wattage/kw, model, type, etc.
2. Email digital pictures of element:
a.) Front, then turn over to take picture of the
Back.
b.) Plug, plug area.
3. Length, width of element frame.
We will reply by email with cost for rebuilding this type / model.
Email:
toac@sbcglobal.net
Rebuilding Originals ...
avoid alterations and generic quality problems. Original elements are
specific to your stove, fit properly, highest quality, longest lasting.
“You
Guys Are My Heroes!”
YAY!
I received the electric element for my old G.E.
range today and it works!! You guys are heroes!
Thanks so much, you
guys rock!
- Colleen, San Francisco, CA
|
